Galvanized Hex Nut & Washer
GALVANIZED HEX NUT
Hot dipped galvanizing puts the thickest possible coating on the metal resulting in superior corrosion resistance. Due to the thickness of the coating hot dipped galvanized bolts are not compatible with other nuts. Galvanized nuts are tapped slightly larger than other nuts to accommodate this coating.
All Sizes Galvanized Hex Nuts (Per kg)
G.I NUTS
3/8″ Nut
1/2″ Nut
5/8″ Nut
M6 Nut
M8 Nut
M8 X 40 Long Nut
M10 Nut
M12 Nut
M14 Nut
M16 Nut
Wedge 3/8″ Nut
Wedge M10 Nut
H.D.G WASHER
H.D.G Flat washer 5/8“
H.D.G Flat washer M10 & 3/8“
H.D.G Flat washer M12 & 1/2“
H.D.G Flat washer M16
H.D.G Nuts
H.D.G 3/8″ Nut
H.D.G 1/2″ Nut
H.D.G 5/8″ Nut
H.D.G M8 Nut
H.D.G M10 Nut
H.D.G M12 Nut
H.D.G M16 Nut
GALVANIZED HEX WASHER
Galvanized steel is coated with zinc as a means of protection against corrosion. Hardened steel made by stamping is used to produce the initial washer shape before being coated with zinc. They are galvanized for increased resistance to corrosion, and conform to DIN125 standards. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut.
All Sizes Galvanized Flat Washers (Per kg)
All Sizes HDG Nuts and Washers (1kg)
(Get quote)
G.I WASHER
1/2“
3/8“
M8
M16
M19
